Premium ratchet tie-downs for hauling your motorcycle in a pickup bed or on a trailer. Sold in pairs, rated 1,200 to 2,400 lb, with stainless or vinyl-coated hooks. The 2″ x 5′ pair is in our Haul & Tie-Down Kit.
Ships separately from shelter orders.
Premium ratchet tie-downs for hauling your motorcycle in a pickup bed or on a trailer. Sold in pairs, rated 1,200 to 2,400 lb, with stainless or vinyl-coated hooks. The 2″ x 5′ pair is in our Haul & Tie-Down Kit.
Hauling your motorcycle in the back of a pickup or on a trailer? These Rod Saver ratchet tie-downs come in pairs, rated 1,200 to 2,400 lb depending on size, with stainless steel or vinyl-coated hardware. The heavy-duty 2″ x 5′ pair is the one in our Haul & Tie-Down Kit.
Which size?
Heavy-duty 2″ x 5′: the longest heavy-duty strap, for anchors set back from the bike, like the front corners of a pickup bed. 2,400 lb capacity.
Heavy-duty 2″ x 3′: for anchors close to the bike. Less loose strap flapping at highway speed. 2,400 lb capacity.
Rubber grip 1″ x 6′: a soft rubber grip on the ratchet, easier on your hands when you crank the bike down. 1,800 lb capacity.
Stainless 1″ x 3′, 4′ or 6′: stainless steel ratchet and two stainless S-hooks, for riders who want hardware that resists rust. 1,200 lb capacity.
Hooks: the rubber-grip and heavy-duty straps have a heavy vinyl-coated top hook and a zinc-plated bottom hook. The stainless straps use stainless S-hooks.
How to tie down a motorcycle in a pickup bed. Roll the front wheel up against the front of the bed or into a wheel chock. Put soft loops on the handlebars so no hook touches paint or chrome. Run two straps forward to the front bed anchors and pull the front suspension down partway. Add two straps from the rear frame to the back anchors to stop side sway. Check each strap’s rating against your bike’s weight, and re-tighten after the first few miles.
Can I use these to haul a motorcycle in a pickup truck? Yes. Anchor them to the bed tie-down points, use soft loops on the bars and frame, and check each strap’s capacity against your bike’s weight. Plan on four straps: two pulling forward, two to the rear.
Which Rod Saver strap do I need? The 2-inch heavy-duty straps carry the highest rating, 2,400 lb. The 1-inch rubber grip is rated 1,800 lb and the stainless straps 1,200 lb. Then pick the length that reaches from the bike to your anchor with a few wraps to spare.
Are Rod Saver tie-downs sold in pairs? Yes. Every size comes as a pair of two straps, so buy two pairs for four tie points on the bike.
Get it in a kit
Part of this kit
Everything for the job in one order, priced at the sum of the parts.